Find your next tech and IT Job or contract Electronics

Electronic/Firmware Engineer Leeds - 5 days on-site £40,000 - £50,000 + 10% Pension Contribution + Holiday Are you an Electronics and Firmware Engineer looking for a varied role where you can work across the full product lifecycle, develop cutting-edge hardware and embedded systems, gain exposure to high-voltage applications, and have opportunities for international travel and specialist technical development? This is an excellent opportunity for an engineer with a background in electronics design and embedded firmware development to join a specialist engineering business working on bespoke technical solutions. The position offers a broad range of responsibilities, from concept and design through to testing, commissioning, and ongoing product support. In this role, you will be involved in electrical and electronic design, including circuit design, component selection, schematic capture, and PCB layout. You will also develop embedded firmware for microcontroller-based systems and support assembly, testing, fault finding, and commissioning activities. The ideal candidate will have experience in both analogue and digital electronics, embedded C programming, and the use of electronic test equipment. You will be a self-motivated individual who enjoys working independently while contributing effectively within a small engineering team. In return, you will join a growing engineering environment where you can continue developing your technical expertise, gain experience in specialist high-voltage applications, and work on innovative engineering projects with customers worldwide. The Role: Electronic hardware design including schematics, PCB layout, and component selection Embedded firmware development for microcontroller-based systems Creation of wiring diagrams, BoMs, and technical documentation Testing, fault finding, repair, and product support Support for onsite commissioning and customer installations International travel to customer and company sites with potential offshore work The Person: Experience in analogue and digital circuit design Embedded C programming experience with low-level hardware knowledge Familiar with oscilloscopes, signal generators, loads, and other test equipment Hands-on prototyping skills including soldering and wiring Strong communication skills with the ability to work independently and within a team Degree-qualified with industry experience, or significant equivalent practical experience Reference Number: BBBH278751 Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Power Electronics Researcher - AI & Machine Learning £45,000-£62,000 + Healthcare + Progression + Sponsorship + 33 Days Holiday + Life Insurance + Excellent Company Benefits Are you a Power Electronics Researcher looking to apply your research into AI and machine learning to the design and optimisation of next-generation power electronic systems? This is an exciting opportunity to join an innovative engineering environment working at the intersection of power electronics, artificial intelligence and advanced system design. You will contribute to research and development projects focused on improving the design, simulation and optimisation of power electronic converter technologies, with applications across sectors including electric vehicles, rail and renewable energy. The role would suit a final-year PhD student, recent PhD graduate, Postdoctoral Researcher or Research Fellow with relevant experience in power electronics with experience using AI in their work. You will work closely with experienced engineers and researchers, helping to translate academic research into practical engineering applications. The ideal candidate will have a strong research background in power electronics, alongside experience using AI, machine learning or data-driven techniques within their research. This could include developing their own models, algorithms or tools to support power electronics design, rather than simply using AI tools such as ChatGPT as part of their research. The Role: Research and develop AI/ML approaches for power electronics applications Design, model and simulate power electronic converter systems Investigate the use of AI and machine learning to optimise converter design and performance Develop models, algorithms or tools to support the power electronics design process Research emerging technologies and contribute to technical reports and research outputs Support the transition of research concepts into practical engineering applications The Person: Degree or PhD in Power Electronics, Electrical Engineering or a related field Strong research background in power electronics and converter technologies Experience with AC/DC, DC/DC or DC/AC converter systems Research experience involving AI, machine learning, data-driven modelling or optimisation Experience with simulation tools such as MATLAB, PLECS or Ansys Final-year PhD candidates, recent PhD graduates, Postdoctoral Researchers and Research Fellows are encouraged to apply Reference Number:BBBH280446 Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Electronic/Firmware Engineer Leeds - 5 days on-site £40,000 - £50,000 + 10% Pension Contribution + Holiday Are you an Electronics and Firmware Engineer looking for a varied role where you can work across the full product lifecycle, develop cutting-edge hardware and embedded systems, gain exposure to high-voltage applications, and have opportunities for international travel and specialist technical development? This is an excellent opportunity for an engineer with a background in electronics design and embedded firmware development to join a specialist engineering business working on bespoke technical solutions. The position offers a broad range of responsibilities, from concept and design through to testing, commissioning, and ongoing product support. In this role, you will be involved in electrical and electronic design, including circuit design, component selection, schematic capture, and PCB layout. You will also develop embedded firmware for microcontroller-based systems and support assembly, testing, fault finding, and commissioning activities. The ideal candidate will have experience in both analogue and digital electronics, embedded C programming, and the use of electronic test equipment. You will be a self-motivated individual who enjoys working independently while contributing effectively within a small engineering team. In return, you will join a growing engineering environment where you can continue developing your technical expertise, gain experience in specialist high-voltage applications, and work on innovative engineering projects with customers worldwide. The Role: Electronic hardware design including schematics, PCB layout, and component selection Embedded firmware development for microcontroller-based systems Creation of wiring diagrams, BoMs, and technical documentation Testing, fault finding, repair, and product support Support for onsite commissioning and customer installations International travel to customer and company sites with potential offshore work The Person: Experience in analogue and digital circuit design Embedded C programming experience with low-level hardware knowledge Familiar with oscilloscopes, signal generators, loads, and other test equipment Hands-on prototyping skills including soldering and wiring Strong communication skills with the ability to work independently and within a team Degree-qualified with industry experience, or significant equivalent practical experience Reference Number: BBBH278751 Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Electronic/Firmware Engineer Leeds - 5 days on-site £40,000 - £50,000 + 10% Pension Contribution + Holiday Are you an Electronics and Firmware Engineer looking for a varied role where you can work across the full product lifecycle, develop cutting-edge hardware and embedded systems, gain exposure to high-voltage applications, and have opportunities for international travel and specialist technical development? This is an excellent opportunity for an engineer with a background in electronics design and embedded firmware development to join a specialist engineering business working on bespoke technical solutions. The position offers a broad range of responsibilities, from concept and design through to testing, commissioning, and ongoing product support. In this role, you will be involved in electrical and electronic design, including circuit design, component selection, schematic capture, and PCB layout. You will also develop embedded firmware for microcontroller-based systems and support assembly, testing, fault finding, and commissioning activities. The ideal candidate will have experience in both analogue and digital electronics, embedded C programming, and the use of electronic test equipment. You will be a self-motivated individual who enjoys working independently while contributing effectively within a small engineering team. In return, you will join a growing engineering environment where you can continue developing your technical expertise, gain experience in specialist high-voltage applications, and work on innovative engineering projects with customers worldwide. The Role: Electronic hardware design including schematics, PCB layout, and component selection Embedded firmware development for microcontroller-based systems Creation of wiring diagrams, BoMs, and technical documentation Testing, fault finding, repair, and product support Support for onsite commissioning and customer installations International travel to customer and company sites with potential offshore work The Person: Experience in analogue and digital circuit design Embedded C programming experience with low-level hardware knowledge Familiar with oscilloscopes, signal generators, loads, and other test equipment Hands-on prototyping skills including soldering and wiring Strong communication skills with the ability to work independently and within a team Degree-qualified with industry experience, or significant equivalent practical experience Reference Number: BBBH278751 Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Principal Electronics Engineer (DSP) Macclesfield (4 Days On-Site, Friday WFH) £55,000 - £65,000 + Bonus + 8% Employer Pension Contribution + Flexible Working Are you a Senior/Principal Electronics Engineer with a strong background in hardware and firmware development, looking to join a specialist engineering business where you can play a key role in the design of cutting-edge technology? This is an excellent opportunity to join a highly technical engineering team, taking ownership of the design and development of new electronic hardware and embedded firmware solutions while supporting and enhancing existing product lines. Working on advanced sensing and signal processing technologies, you will be involved throughout the full product development lifecycle, from concept and design through to testing, validation and ongoing maintenance. This position is ideal for an engineer who enjoys solving complex technical challenges and working across both analogue and digital electronics. The successful candidate will possess strong hardware design expertise, embedded C programming skills and extensive experience with digital signal processing techniques (DSP). Any experience with optoelectronics, ARM microcontrollers, FreeRTOS or advanced PCB layout techniques would be highly advantageous. Offering a strong benefits package and a collaborative engineering environment, this is a fantastic opportunity for an ambitious electronics engineer seeking a senior technical position with genuine career development. The Role: Design and development of new hardware and firmware solutions Maintenance, enhancement and support of existing electronic products Digital and analogue circuit design Signal acquisition, A/D conversion and digital signal processing PCB design and layout across new product developments The Person: Strong background in digital and analogue electronics design Experience with signal acquisition, DSP, filter design and FFT Embedded C programming experience PCB layout and hardware development expertise Knowledge of ARM/STM32, FreeRTOS, optics/optoelectronics or HDI PCB techniques advantageous Reference Number: BBBH278541 Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Principal Electronics Engineer (DSP) Macclesfield (4 Days On-Site, Friday WFH) £55,000 - £65,000 + Bonus + 8% Employer Pension Contribution + Flexible Working Are you a Senior/Principal Electronics Engineer with a strong background in hardware and firmware development, looking to join a specialist engineering business where you can play a key role in the design of cutting-edge technology? This is an excellent opportunity to join a highly technical engineering team, taking ownership of the design and development of new electronic hardware and embedded firmware solutions while supporting and enhancing existing product lines. Working on advanced sensing and signal processing technologies, you will be involved throughout the full product development lifecycle, from concept and design through to testing, validation and ongoing maintenance. This position is ideal for an engineer who enjoys solving complex technical challenges and working across both analogue and digital electronics. The successful candidate will possess strong hardware design expertise, embedded C programming skills and extensive experience with digital signal processing techniques (DSP). Any experience with optoelectronics, ARM microcontrollers, FreeRTOS or advanced PCB layout techniques would be highly advantageous. Offering a strong benefits package and a collaborative engineering environment, this is a fantastic opportunity for an ambitious electronics engineer seeking a senior technical position with genuine career development. The Role: Design and development of new hardware and firmware solutions Maintenance, enhancement and support of existing electronic products Digital and analogue circuit design Signal acquisition, A/D conversion and digital signal processing PCB design and layout across new product developments The Person: Strong background in digital and analogue electronics design Experience with signal acquisition, DSP, filter design and FFT Embedded C programming experience PCB layout and hardware development expertise Knowledge of ARM/STM32, FreeRTOS, optics/optoelectronics or HDI PCB techniques advantageous Reference Number: BBBH278541 Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Graduate/Junior Electronics Design Engineer Amersham £30,000 - £38,000 + Training + Progression + Holidays + Pension + Other Benefits Are you a Graduate or Junior Electronics Engineer with a degree in Electronic or Electrical Engineering, looking to join a well-established manufacturer where you will receive hands-on training, take ownership of exciting development projects and play a key role in the design of innovative electronic products from concept through to production? This is an excellent opportunity to join a long-standing and growing manufacturer with over 50 years of industry success. The company designs and manufactures bespoke digital signage and display solutions across a range of sectors including retail, hospitality, transport and marine. With a close-knit engineering team and a strong focus on succession planning, this role offers genuine long-term career prospects. Working as part of a collaborative development team, you will be involved in the full product lifecycle, from schematic capture and component selection through to PCB layout support, prototyping, testing and fault finding. You'll also work closely with software, mechanical and systems engineers to deliver high-quality products. The ideal candidate will have a degree in Electronic or Electrical Engineering, a strong understanding of electronic circuit design and a genuine passion for electronics. Whether you are a graduate with relevant project experience or have a light amount of years in a similar position, this role offers the chance to develop technically while taking on increasing responsibility. The Role: Design and develop electronic circuits from concept through to production Create schematics, support PCB layout activities and select components Carry out testing, verification and fault-finding activities Collaborate with software, mechanical and systems engineering teams Liaise with suppliers and customers to support project delivery The Person: Degree qualified in Electronic or Electrical Engineering (2:1 or above preferred) Graduate or junior engineer Good electronics and circuit design knowledge Experience with CAD software Full UK driving licence and vehicle Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Nous recherchons un Ingénieur en validation de cartes électroniques FPGA Finalité de la mission La personne interviendra afin de réaliser les fiches de test d'une carte mère intégrant un FPGA et un CPU, en vue de la validation des prototypes. Elle participera également à la mise au point sur table, en collaboration avec les équipes R&D, notamment pour l'exécution des essais, l'analyse des résultats et l'identification des corrections nécessaires. Périmètre clé : Fiches de test • Carte mère FPGA / CPU • Validation des prototypes • Mise au point sur table • Collaboration avec les équipes R&D • Cadence Responsabilités principales Prise en main du prototype Analyser l'architecture de la carte mère, les spécifications disponibles et les interfaces FPGA, CPU, mémoires, alimentations, horloges et communications nécessaires à la préparation des essais. Fiches de test Définir, rédiger et maintenir les fiches de test : prérequis, moyens nécessaires, séquences de mise sous tension, points de mesure, résultats attendus et critères d'acceptation. Exécution des essais Réaliser les vérifications électriques et fonctionnelles sur les cartes prototypes, consigner les mesures et assurer la traçabilité des résultats. Mise au point sur table Participer, avec les équipes R&D, aux investigations sur table, à l'analyse des anomalies et à la vérification des corrections matérielles, FPGA ou logicielles. Synthèse de validation Produire les comptes rendus d'essais, documenter les écarts et contribuer à la décision de conformité des prototypes au regard des critères définis. Livrables attendus •Fiches de test détaillées, reproductibles et approuvées •Procédures de mise sous tension, de contrôle électrique et de test fonctionnel •Relevés de mesures et résultats de validation des prototypes •Fiches d'anomalie documentées avec éléments de diagnostic •Comptes rendus de mise au point réalisés avec les équipes R&D •Synthèse de validation et état des corrections vérifiées Compétences techniques requises •Expérience en test, validation et mise au point de cartes électroniques numériques à base de FPGA et/ou CPU. •Bonne compréhension des architectures intégrant processeurs, FPGA, mémoires DDR, alimentations, horloges, reset, interfaces de debug et bus de communication. •Capacité à lire et exploiter des schémas électroniques, des spécifications matérielles et les données de conception issues des outils Cadence. •Maîtrise des méthodes de mise sous tension sécurisée, de mesure, de diagnostic et d'analyse d'anomalies sur prototypes. •Capacité à rédiger des fiches de test claires, structurées, traçables et reproductibles. •Expérience en tests et mise au point de prototypes avec alimentations de laboratoire, oscilloscopes, analyseurs logiques, sondes et moyens de mesure associés. Compétences complémentaires appréciées : •Développement FPGA •Logiciels embarqués •Contraintes de cybersécurité matérielle Profil recherché •Formation ingénieur ou équivalent Bac+5 en électronique, génie électrique, systèmes embarqués ou domaine équivalent. •Expérience significative en validation et mise au point de cartes électroniques numériques. •Rigueur, autonomie, esprit d'analyse et capacité à documenter les travaux réalisés. •Bon relationnel et aptitude au travail en équipe pluridisciplinaire dans un environnement projet. •Capacité à intervenir sur des projets soumis à des contraintes de confidentialité ou de classification. Critères d'acceptation de la mission •Les critères détaillés sont à définir au lancement de la mission. Sur la base du périmètre décrit, ils devront au minimum couvrir : •La complétude, la clarté et l'exploitabilité des fiches de test produites •La couverture des fonctions et interfaces critiques de la carte mère FPGA / CPU •La qualité et la reproductibilité des procédures de test •La traçabilité des mesures, défauts identifiés et corrections

Dans le cadre de l'évolution de son système d'information, notre client recherche un(e) chef(fe) de projet technique senior pour piloter le rapatriement d'une plateforme de gestion électronique de documents vers son propre centre de données. Vous prendrez en charge la roadmap, la gouvernance, le suivi budgétaire et le reporting du projet. Vous coordonnerez les équipes techniques, sécurité, infrastructures, exploitation et métiers, tout en supervisant l'inventaire des actifs, la cartographie des dépendances, le transfert de connaissances et l'identification des engagements contractuels. Vous sécuriserez les scénarios de bascule et de retour arrière, préparerez les validations GO/NOGO, organiserez les recettes et accompagnerez la mise en exploitation de la solution. L'environnement comprend notamment ESX, VMware, Linux/RHEL, JBoss, PostgreSQL, Kubernetes et Docker. La mission s'inscrit dans un contexte hybride, avec deux jours de télétravail par semaine.

Type de contrat: CDI Salaire : 50 KE Localisation : 28000 Chartres, France. Mode de travail : Hybride Le besoin A pourvoir en CDI - Product Owner / Chef de projet GED & GRC seniorContexteDans le cadre du remplacement du Product Owner GED/GRC, nous recherchons un Product Owner / Chef de projet senior capable de piloter des projets en méthodologie Agile Scrum comme en Cycle en V. Le périmètre comprend deux solutions : Une solution de GED développée en interne, avec l'intervention d'un développeur Java. Une solution de GRC dont la maintenance corrective et évolutive est assurée par une société tierce. Missions principalesRecueillir, analyser et formaliser les besoins des utilisateurs et des métiers. Définir les priorités et piloter la feuille de route des solutions GED et GRC. Traduire les besoins en user stories, spécifications fonctionnelles ou cahiers des charges, selon la méthodologie retenue. Gérer et prioriser le backlog dans le cadre des projets conduits en Scrum. Organiser et suivre les différentes phases des projets menés en Cycle en V. Coordonner les métiers, les équipes techniques internes et le prestataire chargé de la TMA. Suivre le développement et les évolutions de la solution GED avec le développeur Java. Piloter la TMA corrective et évolutive de la solution GRC. Préparer, organiser et suivre les phases de recette. Assurer le suivi des anomalies, des correctifs, des évolutions et des mises en production. Veiller au respect des engagements en matière de qualité, de coûts et de délais. Assurer le reporting, le suivi des risques et la communication auprès des parties prenantes. Accompagner les utilisateurs lors du déploiement des évolutions. Profil recherchéPlus de 8 ans d'expérience en tant que Product Owner et/ou Chef de projet. Expériences significatives et clairement identifiables sur des projets de GED et de GRC. Maîtrise des méthodologies Agile Scrum et Cycle en V. Capacité à intervenir aussi bien sur le cadrage fonctionnel que sur le pilotage opérationnel. Expérience de la coordination d'équipes techniques et du pilotage de prestataires externes. Bonne compréhension des enjeux liés à la maintenance corrective et évolutive. Capacité à gérer plusieurs sujets et interlocuteurs simultanément. Excellentes qualités de communication, d'organisation et de synthèse. Une expérience dans le domaine de l'assurance de personnes serait appréciée. Compétences clésProduct Ownership et gestion de projet GED – Gestion électronique de documents GRC – Gestion de la relation client Scrum et Cycle en V Gestion et priorisation d'un backlog Recueil et formalisation des besoins Rédaction de user stories et de spécifications fonctionnelles Pilotage de TMA et de prestataires Recette fonctionnelle et suivi des anomalies Coordination entre équipes métiers et techniques Environnement de développement Java ModalitésDémarrage : dès que possible Télétravail : 2 jours par semaine Présence sur site : 3 jours par semaine Niveau d'expérience : senior, plus de 8 ans d'expérience requis

Dans le cadre d'un projet de traitement de l'obsolescence côté front, intervenir sur les fronts " Tablette vendeur " et leur version desktop. L'application mobile / desktop de vente et d'encaissement en magasins est développée sur le studio " Mobile Builder " de Convertigo, avec des activités de projets et de maintenance. Missions : - Effectuer la maintenance évolutive de l'application Tablette vendeur - Effectuer la maintenance corrective de l'application Tablette vendeur - Effectuer la maintenance évolutive du client Electron - Effectuer la maintenance corrective du client Electron - Participer aux évolutions de l'application mobile de vente et d'encaissement en magasins - Participer aux évolutions de l'application desktop de vente et d'encaissement en magasins - Assurer ponctuellement le support de production des applications développées par l'équipe - Reporter au responsable technique l'avancement des différentes tâches Profil attendu : Expérience sur le Studio Convertigo Mobile Builder et sur le Studio Convertigo côté Back-end. Maîtrise de HTML, HTML 5, CSS 3, Javascript, TypeScript, Angular 5, 6, 7, 8 et/ou Angular 2+, Ionic 3, 4, 5, Apache Cordova, Web Services / API REST/JSON, SOAP/XML, Electron et JAVA version supérieure ou égale à 8.

Commissioning Engineer - Integrated Security Systems (HVDC Converter Stations)LocationMultiple UK Sites (HVDC Converter Stations & National Grid Infrastructure Projects) RateCompetitive Day Rate (DOE) DurationContract OverviewOur client is seeking an experienced Commissioning Engineer to support the testing, commissioning, and handover of Integrated Security Systems (ISS) across critical National Grid infrastructure projects, including HVDC converter stations. This role will focus heavily on commissioning complex electronic security systems within live operational environments, working alongside principal contractors, technology providers, and National Grid stakeholders to ensure successful project delivery. Key ResponsibilitiesCommission and test Integrated Security Systems within critical infrastructure environments. Complete Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and system handovers. Configure, test, fault-find, and validate security platforms. Support commissioning activities across CCTV, access control, intercom, perimeter detection, and associated network infrastructure. Identify and resolve integration, software, and hardware issues. Produce commissioning documentation, test records, and handover packs. Work collaboratively with project managers, installation teams, and client representatives. Ensure compliance with National Grid procedures, safety standards, and project specifications. Support warranty investigations and defect resolution where required. Essential ExperienceProven experience commissioning Integrated Security Systems within critical infrastructure environments. Previous work on National Grid, utility, energy, transmission, HVDC, substation, gas compressor, or similarly regulated sites. Strong commissioning and testing background within electronic security systems. Experience conducting Site Acceptance Testing (SAT). Ability to diagnose and rectify system faults during commissioning and post-handover phases. Experience working in live operational environments with strict permit and safety procedures. Technical Experience RequiredCandidates should demonstrate experience with some or all of the following systems: Genetec Security Center Gallagher Access Control CCTV Platforms IP CCTV Systems Axis Cameras Commend Intercoms Access Control Systems ANPR Systems Fibre Networks Structured Cabling Electronic Security Integration Network Configuration & Diagnostics Security System Software Configuration Preferred ExperiencePrevious involvement with National Grid ISS programmes. Experience on HV substations or HVDC converter station projects. Background working with principal contractors and security integrators. Knowledge of cyber-secure security environments. Experience resolving commissioning defects and supporting warranty periods. Qualifications & CertificationsValid National Grid Person / Competent Person authorisation (desirable). SCO91 (desirable). SMSTS or SSSTS. ECS / CSCS. Relevant manufacturer training (Genetec, Gallagher, Synectics, Commend etc.). IPAF and PASMA advantageous. Fibre optic testing and splicing certifications advantageous. Personal AttributesStrong fault-finding and problem-solving capability. Excellent communication skills. Comfortable working independently across multiple sites. Client-facing and professional. Strong focus on quality, safety, and project delivery. Ideal Candidate ProfileWe are particularly interested in Commissioning Engineers who have previously commissioned Genetec-based security solutions on National Grid, utility, transmission, energy, oil & gas, or other critical national infrastructure projects. Candidates with experience delivering security systems through FAT, SAT, integration testing, and handover stages will be highly desirable. This aligns closely with experience gained on National Grid ISS security programmes involving systems such as Genetec, Gallagher, Axis, Commend, Synectics, and other integrated security technologies. Please click to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive please visit Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales

Merci de contacter Sumi Delplanque directement via LinkedIn. Dans le cadre du développement du domaine Electronic (CoE Mechatronic), nous somme à la recherche d'un profil PM/PMO, L'objectif sera de prendre en charge un ou plusieurs projets IT/IS (notamment autour de GCP ou de la mise en place d'interfaces), soit en tant que PMO (pilotage du planning, suivi des livrables et des actions, reporting), soit en tant que PM (gestion globale, pilotage des équipes, suivi du budget et des délais, animation des comités de pilotage, gestion des risques). Voici les prérequis pour ce profil : - Expérience avérée dans l'environnement IT/IS de grands groupes industriels (4 ans d'expérience minimum). - Bonne maîtrise de l'approche Agile et très bonne capacité de synthèse. - Certification PMP (ou équivalent) et maîtrise de Google Suite. - Note : Aucune connaissance en électronique n'est requise. Anglais courant Le poste est basé à Créteil, avec possibilité de télétravail partiel ( 50 % )

Remanufacturing Technician Colchester £31,000 + £33,000 + Training + Career Development + Pension + 30 Days Holiday + Specialist Engineering Environment Are you an Electronics Engineer or Senior Electronics Technician with a passion for fault finding, diagnostics and mentoring others, looking to take the next step in your career within a specialist automotive electronics environment? This is an excellent opportunity to join a growing engineering business that specialises in advanced electronic repair and remanufacturing, offering further training, genuine career development and the chance to become a technical leader within a highly skilled engineering team. The company is a well-established engineering business with an excellent reputation for technical excellence and quality-driven manufacturing. Operating within a highly specialised sector, they provide advanced remanufacturing solutions for automotive electronic components across the UK and Europe. Due to continued growth, they are looking to recruit a Senior Remanufacturing Technician to support both the technical development of the team and the delivery of high-quality repair standards. In this role, you will be responsible for diagnosing and repairing automotive electronic components at both unit and PCB level, while also supporting and mentoring fellow technicians, driving process improvements and ensuring technical documentation and quality standards are maintained. This position offers excellent long-term career progression, further specialist training and the opportunity to play a key role within a niche and expanding engineering business. The Role: * Diagnose and repair automotive electronic components at both unit and PCB level using specialist diagnostic equipment and software * Lead, mentor and support technicians, providing technical guidance and sharing best practice * Carry out PCB-level repairs, soldering and component replacement to restore products to original performance standards * Identify opportunities to improve remanufacturing processes and contribute to continuous improvement initiatives * Perform end-of-line testing and quality inspections to ensure products meet company standards * Maintain technical documentation and collaborate with engineering colleagues to improve repair techniques and team capability The Person: * Strong practical knowledge of electronics and electronic fault finding * Ability to read and interpret electrical schematics and wiring diagrams * Experience carrying out PCB-level soldering and electronic component repairs * Automotive electronics experience or knowledge of ECUs would be highly advantageous * Confident using electronic test equipment and diagnostic tools * Strong communication skills with the ability to mentor colleagues and drive continuous improvement * High attention to detail with a commitment to quality and engineering excellence Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.